Always a good idea to check the manufactures web page to see if there are newer drivers. If not, try uninstalling the drivers and reinstalling.
From: [email protected] [mailto:[email protected]] On Behalf Of Dan Goldberg Sent: Wednesday, December 03, 2014 9:17 AM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Stumped by printer Have you tried a test page from windows to see if the driver is working correctly? Dan Goldberg From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of TOM HART Sent: Tuesday, December 02, 2014 8:13 PM To: RBASE-L Mailing List Subject: [RBASE-L] - RE: Stumped by printer It is connected by usb, which is the way I connect the 88IV Tom Hart On Tuesday, December 2, 2014 7:46 PM, Howard Langfus <[email protected]<mailto:[email protected]>> wrote: Tom...Do the printers perform a self-test. Hold down the paper feed button at power up. It should print out a test strip showing the printer settings. How are you trying to connect to the computer? USB, CAT 5, Serial? Let me know and I will consult a service manual and suggest the correct settings. The settings are controlled by 2 switch blocks on the underside of the printer located below the small metal access plate.
