That is a little different. We do live individual scans and then we can add markings/notes/stickies to the scanned document which we then store originally as a multi-page TIFF file and later convert it to PDF for permanent storage on a sub-directory. It would be nice to have the BLOB editor save the multi-page scans directly to PDF. Javier, Javier Valencia, PE O: 913-829-0888 H: 913-397-9605 C: 913-915-3137 From: [email protected] [mailto:[email protected]] On Behalf Of Karen Tellef Sent: Thursday, February 19, 2015 1:54 PM To: RBASE-L Mailing List Subject: [RBASE-L] - Re: "Name" of a USB device? Both of these scanners are recognized, but they both show up as the E:\ drive (only one would be plugged in). I would like my program to be able somehow to distinguish which physical device it is and just didn't know if there was an ENVVAL that would trap an identifier of a removeable disk. Sounds like perhaps the blob editor is able to "trap" an identifier, I'd love to know what that is!
Both of these scanners do batch scanning, and the batches are saved as csv files on the devices. So after scaning you just plug it in and RBase sees the scanner as if it's a drive, so I just load my table from the file on the scanner. Easy Peasy! Karen -----Original Message----- From: Javier Valencia <[email protected]> To: RBASE-L Mailing List <[email protected]> Sent: Thu, Feb 19, 2015 1:45 pm Subject: [RBASE-L] - RE: "Name" of a USB device? Karen, The scanner and driver need to be installed so they are recognized, on the newer Windows this happens when you plug in the device. I know you can set a default printer but I am not sure you can define default scanner. I use the Blob editor to do scanning and if you look under File>>Select Source you should see all the available scanners listed by their correct names; my list even shows an old one that I removed and fully uninstalled but somehow cannot get it to completely go away; probably stored in the registry somewhere. BTW, how do you do the scanning? Are you using a plugin? Blob Editor? Javier, Javier Valencia, PE O: 913-829-0888 H: 913-397-9605 C: 913-915-3137 From: [email protected] [mailto:[email protected] <mailto:[email protected]?> ] On Behalf Of Karen Tellef Sent: Thursday, February 19, 2015 1:19 PM To: RBASE-L Mailing List Subject: [RBASE-L] - "Name" of a USB device? At one of my clients, they plug in a USB scanner and it is recognized as a removeable disk. So my RBase program simply retrieves a file E:\Scanner.txt They are going to buy a different scanner which they will also plug into the same USB port and import into the same RBase program, but the file will be in a different format. So what I would like to do is automatically "recognize" what device is plugged in. Is there any kind of environment value that I can retrieve that distinguishes one USB device from another, some kind of "name? Otherwise I'll just have to ask them to select the device from a list. Would be cool if I could automate it though! Karen
