It will not allow me to do that since the settings are not proper. Tried and all the happens is the settings box constantly pops up. I had to use the Task manager to get it to stop.
James Belisle Making Information Systems People Friendly Since 1990 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dan Goldberg Sent: Friday, February 19, 2016 2:29 PM To: Jim Belisle Subject: [RBASE-L] - Re: SETTINGS MESSED UP Maybe try an unload all and see if that fixes it. Out db.all Unload all Out scr Rename the old db Run db.all Dan Goldberg -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Jim Belisle Sent: Friday, February 19, 2016 12:25 PM To: Dan Goldberg Subject: [RBASE-L] - Re: SETTINGS MESSED UP Shows the same settings (or lack thereof) as what I see when I look at the config settings choice. As I said, I have looked at the DB with RCOPE and that did not show any errors. It did however show that the settings were messed up. I have tried copying over to the directory a CFG file from another location. That did not work. I tried fixing the settings while in the explorer mode. It will not allow me to change anything. When I connect in the explorer mode, I get a WRITE error but it does allow me in the DB. But then the settings are all wrong. James Belisle Making Information Systems People Friendly Since 1990 [cid:[email protected]] From: [email protected] [mailto:[email protected]] On Behalf Of Bill Downall Sent: Friday, February 19, 2016 2:15 PM To: Jim Belisle Subject: [RBASE-L] - Re: SETTINGS MESSED UP Jim, At the R> prompt, what happens when you type SHOW [enter]? What happens when you type SHOW CHAR [enter]? Bill On Fri, Feb 19, 2016 at 3:11 PM, Jim Belisle <[email protected]<mailto:[email protected]>> wrote: I can open the DB in the explorer mode but I cannot change any of the CFG settings. These settings are very strange. There is a CFG file in the same directory as the DB. The CFG file has all the proper settings. I am stumped. James Belisle Making Information Systems People Friendly Since 1990 -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Albert Sent: Friday, February 19, 2016 1:40 PM To: Jim Belisle Subject: [RBASE-L] - Re: SETTINGS MESSED UP It sounds as if the CFG file has disappeared. Find a backup and copy it back into the directory with the R:Base executable. Albert On 2016-02-19 12:04 PM, Jim Belisle wrote: > We are using RBASE 9.5_64 DB. > Just a few minutes ago our people started to get an ACCESS violation. > I haven't seen one of those for years. Once that message came up, others > could not get into the DB. > After I was informed of the problem (I am odd site) I tried connecting in the > Explorer mode. > It acted like it was connected but when I looked at the settings, they were > all messed up. > None of the below areas had a setting at all MANY, QUOTES, PLUS, NULL, > SINGLE, SEMI, DELIMIT, CURRENCY > > I connect with RSCOPE and no errors were found in any area. > Any Blue's clues as to how to fix this? > > James Belisle > > Making Information Systems People Friendly Since 1990 > [cid:[email protected]] > >
