I agree on the path issue. Last night on Win2k Rbase wouldn't even start up. Added path to rbase directory, and cfg file directory, and everything is fine.
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On > Behalf Of Bernie Corrigan > Sent: Wednesday, October 10, 2001 2:40 AM > To: [EMAIL PROTECTED] > Subject: Re: R:Base for DOS on Windows ME > > Steve - > I have been developing with all versions of RBase on an ME machine > with absolutely no problems. Multiple windows open with both DOS and Win > simultaneously talking to the same db. I once had six DOS windows open on > the machine at once and had nothing untoward happen. > > Check your path. I seem to recall having a similar problem very > early on and it turned out to be a bad path. Does EDIT ALL FROM tablename > work? Other than that, be sure you have all the M$ updates installed. > > Bernie > ======================================== > At 12:24 AM 10/10/2001 -0500, you wrote: > >I have a DOS application that I have been developing on mostly Win 98 > >machines without any problems. When I started doing some development on > a > >Windows ME machine I started having problems. I can start 6.5 DOS and > start > >the application. If I try Forms or Reports commands it just returns to > the > >R> prompts. If I try FROM formname I get out of dynamic space and have > to > >kill the DOS session. > > > >On the shortcut I have > > Conventional memory set to auto > > Initial environment set to 4096 > > Extended memory set to none > > MS-DOS protected-mode memory set to auto > > > >Is there something I am missing. I would really like to be able to > develop > >on this machine. > > > >Steve > > > >
