I ended up making a stainless bracket in the shape of a shallow U with holes drilled on either side. One side is fastened to the threaded hole in the bridge, the other to the fender with nylon insert nut. So it serves as a standoff. I needed to bend one side of the "U" slightly to make it parallel with the fender. Here's a 2D representation: ______ (fender) hole ---> / | <---hole (bridge)
Eric On Tuesday, June 10, 2014 10:36:32 PM UTC-5, Eric Peterson wrote: > > I am installing some SKS fenders on my Roadeo and for the rear fender I am > puzzled by the long distance between the natural fender position and the > threaded hole just behind the BB. > What is the best way to span this distance? > I don't want to compromise the threaded rear fender attachment with a long > bolt, but I see no other way to securely fasten the fender there. > Pictures and advice? > > Thanks, > Eric > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.