Zack: It sounds like you need spacers half as thick as the ones you have. With Rivendell being the source of the new rings as well as Sugino, they should be able to advise you, and maybe point you to a source if they don't have them.
dougP On Wednesday, July 16, 2014 12:13:28 PM UTC-7, Zack wrote: > > Hey all. > > My normal google fu is not turning up answers for this, nor has a call to > Riv or a few local shops in Portland. > > This is my problem: > > I replaced my Sugino XD2 stock chainrings with the Rivvy Rings. I didn't > think that I needed the spacers as I had new rings (boy howdy was I wrong, > lesson learned). So now the space between the middle and the small > chainring is bigger than the space between the Large and the middle, which > causes the chain to "hang" in between the two rings. I purchased .6mm > spacers, which moved the middle chainring over just far enough so that the > problem becomes the same, just between the Large and the middle chainrings > (i.e. the .6mm spacer is too thick). > > So, does anyone have any idea where to get more of these? Or what size > they are? I have one in my hardware box, pic is attached so you know what > I am talking about. > > Also, if you have a Sugino crankset, keep these, they are important lol. > > > <https://lh6.googleusercontent.com/-BoR8I9aQ_Hs/U8bOpoShWiI/AAAAAAAAB98/onnTsbQRHtE/s1600/photo.JPG> > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
