Yes, I am. And I'm using the TA Axix Light BB with it at 122mm length and BSC threading. It has a square taper that is, of course, designed to work directly with TA's crankset. This BB has two separate cartridge bearings pressed into threaded cups that mount into each side of the BB shell. To tighten and adjust the TA lock rings you'll need a proprietary wrench (or you'll strip the notches in the rings if you try to use a standard BB spanner) along with the run-of-the-mill splined wrench that is used to install most Shimano BB's.
Can't say that I'm 100% crazy about this BB. It does have the nice feature that allows it to be moved to the left or right a few mm's, but so does something like a Phil Wood. And it has a seal on both of the cups where the spindle goes through them that seems to deteriorate and bind up the spindle after so many miles/years. But I got it because I thought it would present fewer problems when trying to use the TA crankset. On Sunday, August 17, 2014 2:06:15 AM UTC-5, rw1911 wrote: > > If so, could you share what bottom bracket you're using? I'm finding > conflicting information about the proper spindle taper and width. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
