Symmetrical on the 119mm Phil, I assume? The TA is symmetrical. Since this setup works it will probably be the next one I install in my Zephyr configuration.
On Sunday, August 17, 2014 8:56:42 PM UTC-5, Don Compton wrote: > > I had a 60cm Ram and used a 119 Philwood jis bb. After I sold the Ram > frameset( giant mistake), I bought a Roadeo and use the same combination. > The TA Zephyr two ring crank with the 119 bb works flawlessly with my Campy > 10 setup. > > On Sunday, August 17, 2014 12:06:15 AM UTC-7, rw1911 wrote: >> >> If so, could you share what bottom bracket you're using? I'm finding >> conflicting information about the proper spindle taper and width. >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
