Does anyone make quality steel cranks? Seems like a perfect "Riv" project.
On Sat, Feb 14, 2015 at 1:34 PM, Benedikt <neutralbuoya...@comcast.net> wrote: > I added a few pictures for those of you who wanted to see the other side of > the crank including some "mating" the two up. > https://www.flickr.com/photos/neutralbuoyancy/16529273621/in/album-72157607896493013/ > - Brian > > On Thursday, February 12, 2015 at 12:31:07 AM UTC-8, Benedikt wrote: >> >> I seem to remember seeing a similar post to this a few weeks/months ago >> but here it is ... >> My VO crank that had 13,000 miles on it busted this morning on my way into >> work. I was at a stop. Pushed down with my right foot, locked my left clip >> in, pushed down with the right and "clunk" crank arm came right off. >> Fortunately I wasn't going that fast, hammering down the road. What causes >> this? Do ALL cranks have a life span? These are an aluminum alloy. >> Here's a pretty good picture of the break - >> https://www.flickr.com/photos/neutralbuoyancy/16320815710/ >> >> - Brian in Seattle > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at http://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. -- -Zack -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
