Thanks for posting that!!! When the complete bikes were first shown months ago, I rendered the 52cm version in BikeCad to get some sense of how it would fit me. Not much was available on the geometry so I took some measurements from other RBW 650B bikes and simply guessed at others, based on comparing my rendering to the photo of the actual bike. Turns out, I was off 2cm on the chainstays, 1/2 degree on the head angle and 0.2% on the top-tube slope!
Here is a pretty accurate rendering of the 52cm Clem. I had to guess at the fork length which means the head tube is also a guess, based on how BikeCad works. RBW's reported top-tube lengths seem to be effective TT because I put it in BikeCad that way and the front-center came out right. This bike is set up with a 75cm saddle height, a 17 degree 90mm stem and MTB H-bar with 38mm of rise. This is pretty close to how I would fit on the bike, compared to my other bikes. I've spec'ed it with 50mm tires. The trail is fairly low for a Riv of this type and the bottom bracket height is just right. Overall, I find this a very interesting bike and would love to try one. [URL=http://smg.photobucket.com/user/corwin1968/media/Riv%20Clem_zps6udiebox.jpg.html][IMG]http://img.photobucket.com/albums/v627/corwin1968/Riv%20Clem_zps6udiebox.jpg[/IMG][/URL] On Saturday, October 17, 2015 at 11:53:49 AM UTC-5, Tim Wood wrote: > > Hey all, looks like riv has posted the geometry chart on the Clem page. > Must have just went up. No stand over heights but the top tube lengths are > listed. Not sure if it's effective length or actual and how the 6 degree > slope would change the length if it is indeed the actual. > > I'm a little concerned about the 64cm of tt length I'll be rocking on my > 59 but with bosco bars I'm sure reach won't be a major concern. > > Can't wait. > > Tim -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.