I suppose we could always chop off the plastic receiving clip from the bracket and epoxy it onto a small hose clamp. Wouldn't be pretty, but man that'd be a good fit for a rack mount ;)
On Thursday, November 12, 2015 at 11:51:07 PM UTC-5, Mark in Beacon wrote: > > Thanks Zed. I do the electric thing with my cygo too. Even with the double > bit of rubber it is too loose on most every bar. I don't get why they make > it like that. But getting down to rack diameters...wish these light > companies would make a better range of interchangeable mounts. > > On Wednesday, November 11, 2015 at 10:37:49 PM UTC-5, Zed Martinez wrote: >> >> Mark, it's just a Cygolite OSP with external pack, a discontinued model >> (picked it up on clearance at some point for peanuts) but I think the >> Mitycross line is the same stuff. It's just a handlebar mount, but even >> with the provided padding I couldn't quite get it tight enough so I just >> used some electrical tape to help me wrap another thin piece of rubber >> padding from some other light mount around to make the tubing a fatter >> diameter there. After a couple of rounds of trial and error I got just the >> right fatness for the clamp to catch properly. It's more secure than it >> looks like it oughtta be, Then I just strap the pack to the front of the >> rack on the underside. Like this: >> >> >> <https://lh3.googleusercontent.com/-lveOFQAXvBc/VkQJhEVW1wI/AAAAAAAAFgI/7mD9ihRTwMw/s1600/WP_20151111_22_34_28_Pro.jpg> >> >> >> On Wednesday, November 11, 2015 at 10:09:33 PM UTC-5, Mark in Beacon >> wrote: >>> >>> Zed, what is the light you are using here? How is it clamping to rack >>> diameter tubing? Thanks! >>> >>> On Wednesday, November 11, 2015 at 11:00:28 AM UTC-5, Zed Martinez wrote: >>>> >>>> >>>> >>>> Here's a shot of the final setup regarding that: >>>> >>>> >>>> <https://lh3.googleusercontent.com/-Xdx8Xkj8ONc/VkNlLAXZjyI/AAAAAAAAFf4/n4ahRdv3RCQ/s1600/12240812_10153720383624106_1846002533406206256_o.jpg> >>>> >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
