How difficult was the tubeless set-up with the Barlow Pass tires? Sweet looking rig - I imagine it rides very plush!
On Saturday, June 4, 2016 at 4:50:41 PM UTC-5, Bill Lindsay wrote: > I built a road wheelset around the HED Belgium C2 Plus rims, wanting to > get the plumpest tubeless road tires on my road bike. It turns out I went > too wide, both in the tire and in the rim, and it just was not going to > work. I took a half-step down in rim width to the normal HED Belgium C2 on > the road bike. The happy consequence was my Hillborne got a nice wheel > upgrade, and now sports Compass Barlow Pass Extralights, tubeless, and now > weighs 24 pounds. > > Tubeless Hillborne > <https://www.flickr.com/photos/45758191@N04/27428634516> > > In the process of wanting to run really fat tires on a roadish bike, I > decided I wanted cantilever brakes that would open WIDE, so I picked up a > set of Shimano CX70 brakes here on the list, only to find how hard it is to > actually QR them. It's quite difficult to get the cable head out of it's > little receptacle. I suspect that might have been part of why the seller > sold them. Anyway, I stared and thought, and cogitated, deliberated, and > ruminated, and came up with a solution. First, here's a photo of the cable > end we're talking about: > > CX70 brake <https://www.flickr.com/photos/45758191@N04/27428641486> > > The issue is that the cylindrical head fits into the ROUND recess in the > front part of the brake arm, and there's a LONG finger on the back part. > Un-modified you have to have enough slack to get the cable part all the way > around that back finger, so the cylindrical head can pop out. > > My modification involved filing the front face of that cylinder. I > tapered the non-load bearing end quite a bit so now you can push the cable > straight down (in-line with the cable itself) and the cylindrical head just > pops out of that round hole, and frees right up. > > Close-up of the mod > <https://www.flickr.com/photos/45758191@N04/27428643846> > > So, if you are like me and bought CX70s for the express purpose of being > able to remove fat-tired wheels without deflating a tire, and you are like > me and dislike how hard it is to QR your CX70s, then consider this mod. > > Bill Lindsay > El Cerrito, CA > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
