Rivendell sells the Nitto 25.4 to 26.0 shim for $10. It's a little pricy but does the job perfectly. Or, you can make your own shim from a beverage can.
On Wed, Mar 1, 2017 at 6:17 AM, Garth <garth...@gmail.com> wrote: > First of all is the technomic actually marked 25.4 and does it measure as > such ? Check the bars too while you're at it, assuming you have some > calipers. > > While proper torque is great, proper torque is great, repeat. Mega torque > not so great. > > Assuming clean(no grease on surfaces), proper fitting parts and torque and > still slipping I have read many a people using .... > 1. Very thin layer of fine sandpaper in between if it can fit. > 2. Lapping compound for alloy and carbon parts, Park tool and Finish Line > makes some. > 3. Gently rough up the surfaces of bar and inside stem with very coarse > sandpaper, left to right, horizontal, to create a cross grain effect. > Gently. > 4. A quick cheap try would be some hair spray on both surfaces, let dry > and it will be quite grippy. > > > Myself I have not had Alba bars slip either with 2 and 4 bolt stems, 3 > cheers for open face stems☺☺☺ > Quills pita.....😉 > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > Visit this group at https://groups.google.com/group/rbw-owners-bunch. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
