Since I trust people here more than most, I decided I would ask instead oh assuming or hoping...
I am installing a Sugino AT triple (50/38/26) on a Joe. I am using a 130mm Phil Wood bottom bracket that I happened to have in the stash, knowing that something even more exotic (127.5/+5?) is called out but thinking 130 symmetric would be fine. I am a pragmatist, what can I say... That said, I have installed the BB and cranks and to make it all work the drive side cup (Phil) is only half way in, so let's say 4 out of 9 actual threads showing, 4.5-5 threads in the frame. The question is, is that enough? Would you trust that? I think it is probably at the edge but also ok - but I am looking for confirmation. If it is not so ok, I have other options, though not as desirable. Any experience or knowledge of such things? All help appreciated... Bob Lovejoy Galesburg, IL -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.