This PW bottom bracket was purchased somewhere around 1998 and has been used intermittently on the bike it was installed on for the past ~20 years or so. I'm thinking maybe it has 6K or so miles on it. It's a standard English threading, 68mm BB shell width with a 113mm spindle length. Spins fine so it should still have many miles left before a retrofit is necessary.
WARNING: this has an asymmetrical spindle, the drive-side being 5mm or so longer than the left side. It would be more or less the standard for an older 70's vintage steel frame with 126mm rear dropout width, using maybe a triple crank, if someone is doing a restoration. The BB includes both drive and non-drive side SS fixing rings ("cups," PW calls them) for let's say something like maybe $30 or so. Lemme know off-line, as usual. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.