Oh, that alignment. Since there's only one way it'll fit, I don't even think about it much. Insert wheel, twiddle with cassette joint until anti rotation washers are aligned properly, stuff washers into dropouts, tension chain, etc.
It's tedious, but I haven't found it to be overly complicated. Then again, I may have a different opinion of complicated from other people. --dlloyd On Fri, Feb 19, 2010 at 15:20, Jim Thill - Hiawatha Cyclery < thill....@gmail.com> wrote: > On the Nexus/Alfine hubs, the axle needs to be aligned with the > dropout such that the cable stop arm is pointed forward at an > appropriate angle. There are color-coded alignment washers on the axle > for this purpose, and they have to be oriented in the right direction > as you slide the wheel into the dropouts. > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
