The Seculas are very nice and bright lights (steady only) and -- I learned this from Kelly at K-Lites -- are designed to prevent overvolting; apparently the K Lite puts out enough power (it charges a large capacitor in a separate box) to blow unprotected rear dyno lamps (Thanks Steve Kurt, I think it was, who sorted this out).
Does anyone have any ideas for mounting the Seculas to the seat stays besides the OEM zip ties? I've got 2 Seculas, 1 dynamo and the other battery, zip tied to the CS just below the rear rack bosses; like Neil I can't mount them on the seatpost, or for that matter, on the rack bosses, because I use saddlebags on this bike; the lights presently are just low enough to clear the bottom of the biggest bag. Ideas besides zip ties? Ideas about brackets/arms attached to rack bosses? Pictures if any? On Mon, Jan 28, 2019 at 9:28 AM Neil Doran <neil.h.do...@gmail.com> wrote: > .... > > Another consideration along those lines...the rear Secula light mounted on > the seat stay is in fact a bit ugly, but not enough to overcome the > utility. It sticks out a bit, and may take a beating at some point. On the > Riv staff bikes page, Roman has that light mounted cleanly on the seat tube > just below the seat stay junction, but I always have bags on the saddle, so > that solution is no go for me. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.