My Homer is a relatively new Waterford - I wish I had the foresight to order my frame pre-drilled. Theoretically you can drill a clean hole without any need to repaint / touchup?
On Sunday, January 27, 2019 at 7:33:54 AM UTC-8, Tony DeFilippo wrote: > > After checking in with Grant on my Saluki I drilled a hole in the downtube > to head tube lug window which I then chamfered. The exit hole is about an > inch up the seat tube also chamfered. Drilling the frame isn't for the > faint of heart but it worked for me and does clean up the wiring. My > correspondence from Grant was that both locations were structurally safe to > drill a wire sized hole. > > Tony > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at https://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/d/optout.
