Adam, Oven cleaner! Interesting. I've seen various references about soaking in various highly caustic liquids, bead or sand blasting, polishing by hand or wheel, etc.. I'm hoping for a ready-made solution. That's a great fall-back plan though.
Thanks, Tom On Wednesday, January 1, 2020 at 11:32:03 AM UTC-5, Adam in Indiana wrote: > > I've ordered a Deckas brand narrow-wide off eBay before ($20ish), and then > soaked it in oven cleaner to remove the black anodise. It was for a > five-arm Sugino crank, 110 bcd. > > After the anodization is removed it'll have a rough texture to it, but > some high-grit paper and metal polish will clean it up. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/57194576-09fc-4ff0-b46f-641177f9da90%40googlegroups.com.