Thanks, Laing. The shop did find that it was bent, but said (but only in a brief phone message) that simply fixing that would not fix the rub; must go over and ask for clarification.
I do hope it's merely a matter of replacing the hangar (it's a bolt on). On Fri, Sep 11, 2020 at 6:33 AM lconley <lcon...@brph.com> wrote: > Check the derailleur hanger alignment. The inner plate should not rub the > spokes if the derailleur hanger alignment is correct. > > Laing > > On Thursday, September 10, 2020 at 10:52:10 PM UTC-4, Patrick Moore wrote: > >> What do you recommend for a rear derailleur for the following >> preferences, listed in order of importance: >> >> 1. Shifts nicely with Bar Cons (yes, the Suntour ones) over 10 properly >> spaced 10-speed-specific cogs (using 11 speed chain, if that makes a >> difference). The rings are 42/28, and I let the chain sag in the >> small/smaller cogs because I don't use those combinations. >> 2. Shifts nicely over a close-ratio cassette: 13-25 (....20-22-25). >> 3. Is reasonably durable and reliable. >> 4. Is silver of, if black, then not horribly ugly. >> >> I've been shifting a 8-speed-era Dura Ace rd over the cassette, and it >> works very well except that I belatedly discovered that the inner cage >> plate rubs the spokes in the small ring/big cog combo. I want to use that >> combination. >> >> The Bar Cons pull the DA 7410 (I think) rd over the 10 cogs with about >> 90* of movement, and there is perhaps more lever travel available. >> >> I had a very nice Miche road rd about 5 years ago that might have worked, >> but an errant stick broke it. I don't know if Miche road rds are still the >> same. >> >> Ideas? >> >> Or perhaps someone has a nice condition, silver, 8-speed XT rd to sell? >> >> Thanks. >> >> -- >> >> ----------------------------------------------------------------------- >> Patrick Moore >> Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum >> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/d423f597-c9fd-4779-9a2c-908cd09e55ado%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/d423f597-c9fd-4779-9a2c-908cd09e55ado%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- ----------------------------------------------------------------------- Patrick Moore Alburquerque, Nuevo Mexico, Etats Unis d'Amerique, Orbis Terrarum -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CALuTfgsU3oX4Jn_KK59g2es9X13rf1ykWZ-JLsMDuEZYWP58cw%40mail.gmail.com.
