B&M Light is off to the Bay Area. Added some saddles and a tapered headset (make an offer!):
- FSA 1.125 to 1-5 EC headset. Top is cup and cone, bottom is cartridge w/ a 45 deg contact (no crown race), came off of my disc all-road bike.* $30 shipped* - Stock Saddle (Ti Rails, but 283 g measured) from my Kona. 140mm wide, 270mm long. Used for about 1 year, and it has a couple scrapes on it. *$20 Shipped* - WTB Koda saddle. Steel rails, 150mm wide. Partner tried it on the AHH, but went back to the Brooks. Pretty much brand new except clamp marks. *$20 Shipped* - *Teravail Cannonball 650x40 light and supple, tan. About 300-400 miles. A good Country-Bike tire for a new Sam or AHH. Cannonball | Teravail <https://teravail.com/tires/cannonball#TR7268> $40 shipped * - IRD Scramjet BB for Shimano Hollowtech II cranks. Spins smoothly. This one: IRD ScramJet Bottom Bracket Cups w/bearings | Soma Fab Shop <https://www.somafabshop.com/shop/product/ird-scramjet-bottom-bracket-cups-w-bearings-2550?category=2792> . *$20 Shipped* Cheers, Collin in Sactown On Sunday, January 17, 2021 at 6:11:58 PM UTC-8 Collin A wrote: > Alrighty, the bars were quite popular, but went to the local buyer (who > was also first dibs). > > Rest of the bits are still up for grabs: > > B&M IQ-XS, silver, 65cm cable, rear light connectors installed. It's been > on a bike for about a year, but only about 50 miles on it, if that. I have > the rear light cord, shorty mount, and the front reflector as well if > desired. *$90 shipped* > > Teravail Cannonball 650x40 light and supple, tan. About 300-400 miles. A > good Country-Bike tire for a new Sam or AHH. Cannonball | Teravail > <https://teravail.com/tires/cannonball#TR7268> *$50 shipped* > > IRD Scramjet BB for Shimano Hollowtech II cranks. Spins smoothly. This > one: IRD ScramJet Bottom Bracket Cups w/bearings | Soma Fab Shop > <https://www.somafabshop.com/shop/product/ird-scramjet-bottom-bracket-cups-w-bearings-2550?category=2792> > . *$30 Shipped* > > Cheers, > Collin in Sacramento > > On Sunday, January 17, 2021 at 4:04:14 PM UTC-8 Lucky wrote: > >> E-mailed re: Fun 3 >> >> On Jan 17, 2021, at 16:01, Collin A <collinm...@gmail.com> wrote: >> >> Hi Everyone, >> >> >> I have some leftover bits from a few bike projects and bar conversions, >> and a currently overflowing parts pin. Photos here: >> https://photos.app.goo.gl/D4YDUqGTy17v8PLP7 >> >> Simworks Fun3 Bars, silver CrMo. 25.4 center clamp, 680mm wide. Worked >> well for a more setback position than the Riv Wavy bar, and MUCH easier to >> attach bags to. This one: Fun 3 Bar – SimWorks USA >> <https://www.sim.works/collections/handle-bars-simworks-by-nitto/products/fun-3-bar>. >> >> *$40 + actual shipping* >> >> B&M IQ-XS, silver, 65cm cable, rear light connectors installed. It's been >> on a bike for about a year, but only about 50 miles on it, if that. I have >> the rear light cord, shorty mount, and the front reflector as well if >> desired. *$90 shipped* >> >> Teravail Cannonball 650x40 light and supple, tan. About 300-400 miles. A >> good Country-Bike tire for a new Sam or AHH. Cannonball | Teravail >> <https://teravail.com/tires/cannonball#TR7268> *$50 shipped* >> >> IRD Scramjet BB for Shimano Hollowtech II cranks. Spins smoothly. This >> one: IRD ScramJet Bottom Bracket Cups w/bearings | Soma Fab Shop >> <https://www.somafabshop.com/shop/product/ird-scramjet-bottom-bracket-cups-w-bearings-2550?category=2792>. >> >> *$30 Shipped* >> >> Hope everyone is having a good weekend. It's just about perfect here in >> Sacramento (seen below my newly drop-barified Joe A, from the forest divide >> trail near Auburn, CA). >> >> <PXL_20210116_220331589.jpg> >> >> >> Cheers, >> Collin in Sac >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/a820e34e-a140-40b2-bef7-46b7daa7757cn%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/a820e34e-a140-40b2-bef7-46b7daa7757cn%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> <PXL_20210116_220331589.jpg> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/3024bfc7-5356-44f5-b4bc-e20af04e3fa9n%40googlegroups.com.
