Ed, can you measure from the bottom of the platform to the hole at the dropout on your 32 R rack, Thanks, Steve
On Tue, Jul 27, 2021 at 7:46 PM 'Gerard Gunhouse' via RBW Owners Bunch < rbw-owners-bunch@googlegroups.com> wrote: > Ed > > Much appreciate the feedback. According to the chaps in Walnut Creek the > 32R should work just fine my H/H being a 650 wheel size. That said, I think > you are spot on correct especially if one plans to include a fender option. > After all when in doubt go big. > > Cheers > > Gunner > > > On Monday, July 26, 2021 at 10:18:43 PM UTC-4 Ed Carolipio wrote: > >> Hi Gunner, >> >> I suggest going with the 33R as I'm convinced the 32R was built with 26" >> wheels in mind. I've tried the 32R on the following bikes: >> >> - 51cm Appaloosa (650b) - Needed to run on low-mid braze on. Could be >> run on the dropout braze-on but contacts top of rear fender. >> - 47cm MIT Homer (650b) - Just clears with the fender and 42mm tires >> - 46cm Clem L - Perfect >> - Small Gus Boots Wilsen (650b) - Not even close >> >> I ended up getting the 33R - currently on the Hillsen - and keeping the >> 32R on the Clem. >> >> --Ed C. >> >> On Friday, July 23, 2021 at 12:36:29 PM UTC-7 gpgun...@aol.com wrote: >> >>> Hello All >>> >>> I would greatly appreciate it if anyone can tell me the correct Nitto >>> rear rack size (32R/33R) for a Toyo built 56cm H/Hilsen with 650B wheels. >>> Initially , I was thinking large (33R) but now I am just not sure. The >>> older Toyo built Hilsen frame geometry has me questioning the optimal size. >>> Again, much appreciated. >>> >>> Cheers >>> >>> Gunner >>> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/2e7b9045-41d7-4084-88cd-c79ae4eebe88n%40googlegroups.com > <https://groups.google.com/d/msgid/rbw-owners-bunch/2e7b9045-41d7-4084-88cd-c79ae4eebe88n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- Steven Sweedler Plymouth, New Hampshire -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/CALimyfLyWz%3DOtf6C7NzRTqDXmXNfFx0_vT0OTE6TLYe5XcGaMw%40mail.gmail.com.
