Am hitting a crossroads with this. For the first few years of owning this bike, used a Shimano Alfine single ring crankset with guard and a 38t ring. Then at some point decided to go with a Sugino in a similar setup. Problem is, have gone through at least 2 non drive side crank arms since then. Obviously user error. And there are no more arms to be found. (The one that Ben's Cycle carries has a spider no matter what the photo shows).
So the question becomes - do I spring for a Silver crankset, swap out the stock 34t for a 36t and ignore a front derailer, or just put the Alfine back on? Thanks in advance for any advice you want to give. Eric Platt St. Paul, MN -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/e2f596af-c766-4b7c-a542-e56b55d8b50an%40googlegroups.com.
