Thanks everybody, I grabbed the Knipex bolt cutters Shoji mentioned. Which is the flat-side straight cut I need, I don't think I explained that very well.
On Monday, December 20, 2021 at 7:17:07 AM UTC-8 Shoji Takahashi wrote: > Consider Knipex bolt cutters. Pricey, but worthwhile. Mine have remained > sharp over time despite cutting fender stays, cables, housing. (And using > them for garden work, like cutting chicken wire and hardware cloth.) > > I also have a set of Pedros, which I've only used with housing and cables. > It works well, but my Knipex bolt cutter seems to-be close at hand most > times. > > Good luck! > shoji > > On Monday, December 20, 2021 at 2:17:43 AM UTC-5 Joe Bernard wrote: > >> I have Park Tool cable cutters but not the kind that cut flush. What do I >> get that cuts an inner shifter wire straight and flush? >> >> Joe Bernard >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/b0666952-5efd-429e-bbd4-1a3d3d915bebn%40googlegroups.com.
