There is a little cut out in the pedal body where the cap is pushed in. Jam and awl or other spikey object in there and leverage the cap out. At least that is how I do it.
On Tue, May 11, 2010 at 10:55 AM, Bill Connell <bconn...@gmail.com> wrote: > How did you get the plastic dust cap out? I assumed it was just > threaded and tried to unscrew it with a pin tool, and all i did was > mangle the pin holes, the cap didn't budge. > > > On Tue, May 11, 2010 at 12:49 PM, Bill Gibson <bill.bgib...@gmail.com> > wrote: > > Yep. Go for them. Grip Kings feel like arch support, so any light shoe is > > a rigid bike shoe, with no hot spots. You have "high efficiency", > infinite > > pedal float to save your joints, and get-on-and-go readiness. I lube mine > by > > pulling the plastic plug over the outboard bearings and dribbling in > Phil's > > gooey green oil, and popping it back in. Mine don't seem to leak oil > much, > > or at all after that treatment. > > > > On Tue, May 11, 2010 at 10:39 AM, Brad Gantt <brdg...@gmail.com> wrote: > >> > >> I say go for it. I love my 'Kings. Recently rode a fast 40 miles in > >> Tevas and total comfort. They don't feel big, they feel good. > >> > >> -- > >> You received this message because you are subscribed to the Google > Groups > >> "RBW Owners Bunch" group. > >> To post to this group, send email to rbw-owners-bu...@googlegroups.com. > >> To unsubscribe from this group, send email to > >> rbw-owners-bunch+unsubscr...@googlegroups.com<rbw-owners-bunch%2bunsubscr...@googlegroups.com> > . > >> For more options, visit this group at > >> http://groups.google.com/group/rbw-owners-bunch?hl=en. > >> > > > > > > > > -- > > Bill Gibson > > Tempe, Arizona, USA > > > > -- > > You received this message because you are subscribed to the Google Groups > > "RBW Owners Bunch" group. > > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > > To unsubscribe from this group, send email to > > rbw-owners-bunch+unsubscr...@googlegroups.com<rbw-owners-bunch%2bunsubscr...@googlegroups.com> > . > > For more options, visit this group at > > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > > > > > -- > Bill Connell > St. Paul, MN > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bu...@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com<rbw-owners-bunch%2bunsubscr...@googlegroups.com> > . > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
