Ben, I'm also in Omaha and a big fan of the crust towel rack. I have a 600 on my 58cm quick beam and am holding a 630 for my 58cm hunq that is currently being painted. If you want to hold the 630 or ride the QB to check the feels I'd be down to meet.
I had the Nitto noodles and the flares on the Towel Rack reeeeeaaaalllly help me get into a good comfortable but not overly relaxed position. I've rode them on 150 mile rides around here on the gravel and are quiet easily the nicest cockpit set-up I've used. Another nice option is the Ritchie VentureMax, I had the carbon bars on my bombora but swapped them out for towel racks, I find there are more hand placement options with the TR. Cheers! Jason "in rural Springfield which is basically Omaha" Zakaras On Friday, December 9, 2022 at 9:49:26 AM UTC-6 lwt...@gmail.com wrote: > Check out the PNW Coast bar. A little flair but not too crazy. They make > really nice stuff at a reasonable price and great customer service. > > On Friday, December 9, 2022 at 8:25:06 AM UTC-7 Coal Bee Rye Anne wrote: > >> 52cm Nitto RM013 - it's essentially a 48mm Noodle with extra flare only >> in the drop itself (so hoods retain a more normal orientation but that >> extra flare when in the drops feels nice if venturing off into slightly >> more technical terrain.) >> I started with a 48cm RM013 after being confused about the measurements, >> which differ from the Noodle, and found the 48cm RM013 it a hair too narrow >> for my liking. I eventually acquired the desired 52cm of the same model >> through a series of parts swaps and list purchases as well as a Salsa >> Cowbell in the widest 46cm size (which is 46cm center to center at the >> hoods making the drop/bar ends over 50cm.) >> >> I really like aspects of both the Cowbell and RM013 for the types of >> riding you describe but found I personally seem to prefer longer ramps. >> The Cowbell's 68mm reach felt much too short for me, personally, and was >> the only reason I moved away from them. The 90mm reach of the RM013 felt >> much better when on the ramps. I was kind of indifferent to the deeper >> drop vs. the Cowbell but do like the unique flare combined with a more >> traditional road drop for a mixed surface road-ish bike. I'd considered >> trying Crust's new 31.8 Bonneville bar since I was running a 31.8 thread >> less stem with 26.0 shim for the RM013's on my only drop bar bike. I >> thought I'd like to try the longer/flatter 120mm ramp and 15deg flare >> compared to the Cowbell 12deg, however, that frame has since been sidelined >> so won't be attempting any other drop swaps anytime soon. >> >> I also have one of the original v1 Towel Rack/Leather Bar in the >> 66cm/26.0 (only the single option in the v1) but used it only briefly on a >> short brakeless test ride mid-build on another project. It was certainly >> wiiiide but I have not yet had an opportunity to fully test it yet as the >> full build has not yet materialized. Current iterations are also >> significantly different in spec than the v1 but I do hope to eventually >> give it a try. >> >> https://crustbikes.com/collections/handlebars/products/nitto-rm-dirt-drop >> >> https://crustbikes.com/collections/handlebars/products/nitto-x-crust-bonneville-bar?variant=39999234146394 >> >> Brian Cole >> Lawrence NJ >> On Friday, December 9, 2022 at 9:36:15 AM UTC-5 bjmi...@gmail.com wrote: >> >>> Hey everyone! >>> I posted earlier about reach in converting to a wider bar and decided to >>> start a different conversation to get opinions on wide-ish, flared drops. >>> >>> I like the Nitto Noodle quite well, but I think I do want a little flare >>> and I don't want to bend them myself. So what's good out there? I'm tempted >>> by the Crust Towel Rack, but I'd love to hear what you all like. >>> >>> If it helps/matters, the kind of riding I do with the bike it's going is >>> casual rails-to-trails, some rolling gravel roads, but nothing too >>> technical or serious. >>> >>> Thanks! >>> Ben >>> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/0bb47581-a404-4e8e-8b3a-5c9526563cacn%40googlegroups.com.
