You cannot paint polished parts and have the paint stick well - polishing makes the surface too smooth for the paint to grip.
In my mind. if you want silver, especially polished silver, any type of coating beyond waxing defeats the whole purpose of polishing. Cleaning polished parts is easy. Note that Velocity will polish rims before anodizing for an extra cost for a very impressive colored finish. To me, patina is just another word for lazy and not maintained. Beausage is another word for abused. Rusted is not "original". With a few exceptions, nobody sells new rusted bikes. Laing On Sunday, January 22, 2023 at 7:17:33 PM UTC-5 eliot...@gmail.com wrote: > Can you get the finished product clear coated to help with longevity? > > How does Paul treat their factory polished version ? > > On Sun, Jan 22, 2023 at 1:03 PM lconley <lco...@brph.com> wrote: > >> You are assuming that all anodized parts are available without anodizing, >> which it not true for all parts. >> >> Note that most colored anodizing is temporary also, the anodizing fades >> over time. Easy and cheap to restore polished parts, anodized parts - not >> so much. >> >> Black parts show wear and scratches much more than silver. >> >> Even the best silver/clear anodizing wears off. I have a well used 50 >> year old Campagnolo triple crank that has lost its anodizing in many >> locations, I am sure glad that it isn't black, it would look awful. >> >> I would not consider polished aluminum parts high maintenance, many go >> for years before needing a quick rub with Simichrome and then they are like >> new. >> >> You want a high maintenance finish - I have a set of brass Honjo fenders >> for you. One end of the fender tarnishes as you are polishing the other end. >> >> Laing >> >> On Sunday, January 22, 2023 at 1:43:14 PM UTC-5 Philip Williamson wrote: >> >>> >>> I’m with Garth - if you’ve got anodized parts you’d like to make silver… >>> arrange a trade! >>> >>> Philip >>> >>> On Sunday, January 22, 2023 at 7:29:05 AM UTC-8 Garth wrote: >>> >>>> While I don't have any Paul brakes, over Life I've had plenty of >>>> aluminum parts that were of a natural, untreated finish. You can polish >>>> them all you like, but it doesn't last every long until they require more >>>> polishing. The polishing is an attempt to seal the exterior, to create a >>>> "buffer" from the elements, so to speak. It's high maintenance for sure as >>>> it's only temporary. The durable hard anodizing manufacturers use is a >>>> chemical process and as long they're not exposed to excessive corrosive >>>> elements the finish remains indefinitely. Once that finish is removed, >>>> there's no going back, they are back to their natural untreated state. A >>>> sure way to tell the finish of any aluminum part is to rub it with a clean >>>> rag or even your hands as it will leave that telltale gray residue. >>>> >>>> As far as I'm concerned if a part is finished black, or anodized a dull >>>> silver, I leave it alone, or don't buy it in the first place if I can't >>>> live it as purchased. There can be a few exceptions, notably if it's >>>> something tiny. Surely though, I see black and silver parts as >>>> complimentary rather than conflicting. >>>> On Saturday, January 21, 2023 at 6:41:43 PM UTC-5 brendonoid wrote: >>>> >>>>> >>>>> *"The other set of cantis are on a new build I just finished."* >>>>> >>>>> Whoa, hold up! What a teaser, I can't wait. >>>>> >>>> -- >> > You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to rbw-owners-bun...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/23bcf5df-e5be-41bd-8e1a-5ce497bc23cen%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/23bcf5df-e5be-41bd-8e1a-5ce497bc23cen%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/a825a773-eb17-4455-ac28-ca897d1a2559n%40googlegroups.com.
