The best match according to that site for Campy 10 speed shifters is with a Shimano splined 8 speed cassette. I have that on my tandem and it works great. The Zinn article I read talked about interchangability of the 10 speed systems. I believe he used a SRAM 10 speed cassette with Campy shifters. Of course now the 10 speed systems are passe'.
~Mike~ On May 21, 9:36 am, bfd <[email protected]> wrote: > On May 21, 9:21 am, rinjin <[email protected]> wrote:> I have Campy 10 > components (brifters, derailleurs, cranks) on my Ram > > but the rear hub is Shimano. Have used a Wheels Manuf. cassette and > > have looked at other options (Jtek shiftmate, etc). I think someone > > recently posted a link to a Zinn article about using Shimano 9-sp > > cassettes with good results. Searched the archives and can't find the > > link...anyone remember the post or have experience with this mix of > > parts? > > Don't know about Zinn, but one of the best place to start is to look > at this UK site that shows the various ways to mix and match Campy and > Shimano, see here: > > http://www.ctc.org.uk/DesktopDefault.aspx?TabID=3946#Shimergo > > I use Campy 9 drivetrain (ergos, rear der) with Shimano 9 cassette and > sram chain on 2 bikes and it works fine. Don't have to worry about ft > der as Campy ergo shifter is ratcheting and will work with basically > any ft der (except maybe the newer escape/qr stuff). > > I would do the cheapest first - use your Campy drivetrain with Shimano > 9 or 10 cogs. Campy 10 and Shimano 10 are close and many have stated > it works without mod. If that doesn't work, try the "hubbub" method of > attaching the rear der cable on the opposite end of the attachment > bolt. If that fails, try switching out spacers. If not, then try a > jtek. > > > And, yes, I could just build a Campy rear wheel. But that would be so > > easy! > > With IRD offering wide range cassette building up a wheel using Campy > rear hub is a great option! Good Luck! > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
