I use the Jtek Shiftmate to combine Campy 10sp shifters with ShimaNo 9sp cassette. It works flawlessly and is cheap. You won't be disappointed.
You could also use Campy 10sp with ShimaNo 10sp cassette, provided you get the correct Jtek model. On May 21, 11:27 am, Michael_S <[email protected]> wrote: > The best match according to that site for Campy 10 speed shifters is > with a Shimano splined 8 speed cassette. I have that on my tandem and > it works great. > The Zinn article I read talked about interchangability of the 10 speed > systems. I believe he used a SRAM 10 speed cassette with Campy > shifters. > Of course now the 10 speed systems are passe'. > > ~Mike~ > > On May 21, 9:36 am, bfd <[email protected]> wrote: > > > > > On May 21, 9:21 am, rinjin <[email protected]> wrote:> I have Campy 10 > > components (brifters, derailleurs, cranks) on my Ram > > > but the rear hub is Shimano. Have used a Wheels Manuf. cassette and > > > have looked at other options (Jtek shiftmate, etc). I think someone > > > recently posted a link to a Zinn article about using Shimano 9-sp > > > cassettes with good results. Searched the archives and can't find the > > > link...anyone remember the post or have experience with this mix of > > > parts? > > > Don't know about Zinn, but one of the best place to start is to look > > at this UK site that shows the various ways to mix and match Campy and > > Shimano, see here: > > >http://www.ctc.org.uk/DesktopDefault.aspx?TabID=3946#Shimergo > > > I use Campy 9 drivetrain (ergos, rear der) with Shimano 9 cassette and > > sram chain on 2 bikes and it works fine. Don't have to worry about ft > > der as Campy ergo shifter is ratcheting and will work with basically > > any ft der (except maybe the newer escape/qr stuff). > > > I would do the cheapest first - use your Campy drivetrain with Shimano > > 9 or 10 cogs. Campy 10 and Shimano 10 are close and many have stated > > it works without mod. If that doesn't work, try the "hubbub" method of > > attaching the rear der cable on the opposite end of the attachment > > bolt. If that fails, try switching out spacers. If not, then try a > > jtek. > > > > And, yes, I could just build a Campy rear wheel. But that would be so > > > easy! > > > With IRD offering wide range cassette building up a wheel using Campy > > rear hub is a great option! Good Luck! > > > -- > > You received this message because you are subscribed to the Google Groups > > "RBW Owners Bunch" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group > > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group > athttp://groups.google.com/group/rbw-owners-bunch?hl=en. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
