Hi, I had our Clem converted to an Ebike with the Bafabg mid motor kit. 750W system. We got the rack mounted battery. I did it for my 85 year old dad, who only rides ebikes now. He found it too hard to get on and off the Clem and stuck with his small-wheeled ebike. I’ve ridden it several times. 1. The added weight does not affect the bike handling. 2. I generally pedal faster than the motor on the flats, so it is still a workout 3. It is fun to go up steep hills at 15mph. 4. The wires and motor hanging off the bike kills my OCD, its ugly and my was done by a professional. 5. You have to be careful when making tight turns, have the motor off or in the lowest setting, else the bike will throw you.
> On Jul 19, 2023, at 5:02 AM, Andy Beichler <andybeich...@gmail.com> wrote: > > My wife and I have converted two bikes with a mid drive kit very similar to > the Luna Cycle kit that Joe posted. We are very happy with them, so far. It > has been about a year and they are still going strong. > > On Tuesday, July 18, 2023 at 3:00:01 PM UTC-4 Joe Bernard wrote: >> It's fits in a standard BB shell. >> >> https://lunacycle.com/bafang-bbs02-750w-middrive-kit/ >> >> On Tuesday, July 18, 2023 at 11:42:01 AM UTC-7 Wesley wrote: >>> >>> I was not aware that you can do a mid-drive conversion (I thought the frame >>> had to be special designed to accept the drive-unit instead of a bottom >>> bracket). How did you do it? >>> -Wes >>> On Monday, July 17, 2023 at 11:03:34 AM UTC-7 Joe Bernard wrote: >>>> Looks like you're good there, Stephen, 250W is pretty mellow. Yes it's the >>>> torque that would concern me with a more powerful hub motor; no bad >>>> experiences (I used 250W on an Appaloosa), I just try not to be too crazy >>>> with slim fork blades not designed with a motor in mind. Most >>>> front-hub-motor bikes I see are running really beefy forks. >>>> >>>> My first build was a ridiculously powerful rear-hub Clem, Grant rode it! >>>> Then I did a few with even more ridiculously powerful mid-drives, those >>>> were tons of fun. But I'm out of the ebike game these days. Maybe in the >>>> future I'll try one again. >>>> >>>> Joe Bernard >>>> >>>> On Monday, July 17, 2023 at 6:46:52 AM UTC-7 Stephen wrote: >>>>> Hey Joe, >>>>> >>>>> That would be because of too much torque on a weak fork I presume? I'd be >>>>> curious to hear more about your experiences with eRivs, and is that a >>>>> determination you've made based on a bad experience? Have you done both >>>>> front and rear type motors? I have to admit I'm pretty clueless when it >>>>> comes to the details of ebikes in general, but I hope that since this kit >>>>> is intended to be universal it will be safe enough for the type of riding >>>>> my father will be doing and that the company would be responsible enough >>>>> to highlight potential incompatibilities. It does seem like eBikes are >>>>> still a bit of a wild west of little to no regulation.. Unfortunately the >>>>> kit website is pretty limited in describing its technical specifications >>>>> (it is very much designed for non technical people) and I can't find a >>>>> spec as to whether its a 250w or 500w motor, but it does list a 40nm >>>>> torque. How does that speak to your experience? >>>>> >>>>> I didn't notice anything bad on my test ride yesterday, but I suppose >>>>> I'll give it a longer ride today and see if I notice any dangerous fork >>>>> flex... >>>>> >>>>> On Sunday, July 16, 2023 at 10:02:46 PM UTC-4 Joe Bernard wrote: >>>>>> Looks fun but - as a fellow who's built a few eRivs - I gotta throw in a >>>>>> warning here about wattage. If that's a 250W hub you're good, I would >>>>>> worry about 500W on Riv's spindly forks. >>>>>> >>>>>> On Sunday, July 16, 2023 at 4:33:14 PM UTC-7 Stephen wrote: >>>>>>> Thought I'd share my project of the day: electrifying this clem L for >>>>>>> my Dad. >>>>>>> >>>>>>> A little backstory: >>>>>>> >>>>>>> My family and I all chipped in a few years ago to get my Dad a Clem >>>>>>> complete in an effort to give him a fun and healthy exercise activity >>>>>>> following a near death heart attack in 2020. Despite really liking the >>>>>>> look and comfort of the bike, his level of fitness was really limiting >>>>>>> the amount of time he could spend on it. He'd be wiped in under 30 >>>>>>> minutes, and unfortunately living in the suburban south, safe and >>>>>>> accessible riding is fairly limited and largely unexciting unless >>>>>>> you're covering big miles out on country roads. Add to that the fact >>>>>>> that his main riding partner, my mom, has been a long time road cyclist >>>>>>> with a much higher level of fitness, they ended up getting him an ebike >>>>>>> from rei. Its made a huge difference in how much he's able to ride and >>>>>>> his willingness to ride, but he's still been partial towards the Clem. >>>>>>> >>>>>>> So my folks ordered an ebike conversion kit, gosh, like a year ago and >>>>>>> it finally arrived recently. Its a front wheel motor with a handlebar >>>>>>> mounted battery pack, and supposedly a pretty simple install. However, >>>>>>> for some reason the axle on the wheel was 10mm as opposed to the 9mm >>>>>>> clem fork drop outs so I had to do a bit of filing (on the axle) to get >>>>>>> it to fit. Took it for a spin and it really goes! Feels a little less >>>>>>> jarring/unnatural than other ebikes I've tried. I'm curious to see how >>>>>>> it holds up. >>>>>>> >>>>>>> Please excuse the messy cables in the pics, still got some neatening up >>>>>>> to do. And for those curious, the kit is the swytch bike kit. >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> > > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to rbw-owners-bunch+unsubscr...@googlegroups.com > <mailto:rbw-owners-bunch+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/rbw-owners-bunch/130ee007-a677-4a70-baa2-55ea183fb252n%40googlegroups.com > > <https://groups.google.com/d/msgid/rbw-owners-bunch/130ee007-a677-4a70-baa2-55ea183fb252n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/BEDBE562-F965-47E7-A600-DA3C2E9B80F5%40gmail.com.