Dustin: To answer your question, hell no! Ted: Gonna text the frame builder I know tomorrow.
Jared: Thanks! I'll share again when I have some updates. On Sunday, July 23, 2023 at 4:01:11 PM UTC-4 jaredwilson wrote: > Yikes, that looks like a mess! > > Glad you're okay and it's now another part of that Sam's history. > > Looking forward to seeing your repair updates. > > jared > > On Sunday, July 23, 2023 at 12:32:48 PM UTC-7 ted.l...@gmail.com wrote: > >> Wow, I’m glad to hear that it was only a minor tumble, but I’m sorry to >> hear about the derailler… again. That’s quite the pretzel you’ve made, >> though! I’m not sure I’ve seen such, save for deraillers that went through >> a far more severe crash. >> >> I might be crazy, but restoring a busted up mech like that actually >> sounds like it would be a fun challenge. Hope the hanger can be fixed with >> minimal fuss but I think you may be right, a frame builder might be needed >> here. It always baffled me that Riv didn’t adopt replaceable hangers at >> some point along the line. >> >> >> On Sun, Jul 23, 2023 at 3:20 PM D D <macro...@gmail.com> wrote: >> >>> Eric, >>> >>> Sorry to hear about your misadventure. Thanks for the photo of the >>> pretzel. Did the photo you originally pulled over to take turn out to be >>> worth it? >>> >>> Dustin in VA >>> >>> On Jul 23, 2023, at 3:13 PM, Eric Marth <eric...@gmail.com> wrote: >>> >>> >>> Hey gang — I was out for a Sunday ride and stopped to take a picture. I >>> rolled to the side of the road and did not see the culvert, hidden with >>> fresh grass clippings. I tumbled over at low speed. I'm fine! >>> >>> When I stood up I noticed my drive-side bar end shifter had rotated 90º. >>> And my derailer hanger and the derailer were bent. I spun the crank while >>> off the bike and it seemed to move okay so I thought I'd give it a go as a >>> single speed. >>> >>> I pedaled for a few strokes, then nudged the shifter. It was at that >>> time the derailer turned upside down and inside out, bending into the >>> spokes and throwing the chain. It was really fun! >>> >>> <Screenshot 2023-07-23 at 3.05.28 PM.png> >>> >>> >>> This is my Hillborne, my most-ridden bike. I'll see if the hanger can be >>> bent but I have a feeling it will require some work from a frame builder. >>> That's a Suntour Cyclone. Fortunately I have five of them (including this >>> one). You might recall the cage tension spring in my previous Cyclone >>> recently failed. This is one of the replacements I picked up. It was in >>> excellent shape but now it's going to the salvage bin. >>> >>> While I was waiting for a ride four people stopped to ask if they could >>> help me. One was a cyclist who said "You need anything?" I replied "I >>> need derailer hanger, a rear mech and a welding torch!" >>> >>> Hope your weekend rides weren't so mechanically eventful. >>> >>> Eric >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/1c1291d4-ef36-489c-952b-b11c943b5997n%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/1c1291d4-ef36-489c-952b-b11c943b5997n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> <Screenshot 2023-07-23 at 3.05.28 PM.png> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "RBW Owners Bunch" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to rbw-owners-bun...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/rbw-owners-bunch/C18232A6-2E34-4405-90E7-82566F0B50E9%40gmail.com >>> >>> <https://groups.google.com/d/msgid/rbw-owners-bunch/C18232A6-2E34-4405-90E7-82566F0B50E9%40gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> Ted Wood < ted.l...@gmail.com > >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/rbw-owners-bunch/2b13aabd-8d7a-45fb-9dcb-a10f06b3ee53n%40googlegroups.com.