While the ERD is listed in the Alex link included(if a DM24) in this thread, I'd have to ask do you really want/need to dismantle a assumably perfectly good working wheel ? I mean, is space and resouces so limited that you can't build another wheel entirely ?
Hi, yes to both. Thanks for the wisom re ERD and manufacturers inconsistencies. On Monday, November 4, 2024 at 4:10:14 AM UTC-5 Garth wrote: > While the ERD is listed in the Alex link included(if a DM24) in this > thread, I'd have to ask do you really want/need to dismantle a assumably > perfectly good working wheel ? I mean, is space and resouces so limited > that you can't build another wheel entirely ? > > Myself I don't take published ERD for granted so I measure it myself using > two spokes and a digital caliper. Essentially this way > https://www.parktool.com/en-us/blog/repair-help/determining-spoke-length-for-wheel-building > > There's no guarantee that every mfr measures ERD the same way, so > measuring it yourself in a consistent way, with spokes installed as shown > in the Park link, assures it will be consistently accurate. Also measure > the hub. > > Rims need not match, just as using a dynamo hub doesn't match whatever > rear hub used. > > > > > > > > > On Sunday, November 3, 2024 at 10:25:42 PM UTC-5 Kainalu V. -Brooklyn NY > wrote: > >> Dry curious? No. Silly autocorrect, *Very curious 🤔 >> >> On Sunday, November 3, 2024 at 10:23:46 PM UTC-5 Kainalu V. -Brooklyn NY >> wrote: >> >>> I can’t help with the ERD, but I’m dry curious what you used to stick >>> the headbadge. I think the double stick tape typically used is about a >>> sixteenth inch thick. If you go to the hardware store, ask for VHB outdoor >>> doublestick tape. That’s “very high bond”, and shouldn’t bump out the badge >>> too much, and won’t ever let it go without some serious elbow grease. If >>> you’re in NYC, I’ll share some of my ample supply with you… >>> -Kai >>> >>> >>> On Sunday, November 3, 2024 at 8:11:55 PM UTC-5 Michael Baquerizo wrote: >>> >>>> >>>> I have this era of clem, with these wheels (multi colored nipples, etc) >>>> and i don't personally know the ERD of the (front) rim, which I need to >>>> add >>>> a dynamo hub to. >>>> >>>> any chance someone does know it, having it done it themselves or having >>>> someone else? >>>> >>>> while i'm here, i hate what i've used to stick the head tube badge on, >>>> and would like something thinner that allows the badge to properly wrap >>>> around the head tube. does anyone know the exact product rivendell uses, >>>> or >>>> perhaps something different or better? >>>> >>>> >>>> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/87f3436e-f0b6-4592-ad13-d876da234aa0n%40googlegroups.com.
