Hello, I just recently acquired the tools to remove my cranks and BB. After removing both, I found that the tubes seemed pretty rusty. I've been researching different ways I can get rid of this rust but they feel very cumbersome and involved (which I'm willing to do but unfortunately it'll have to wait till May). I'm thinking of possibly filling the frame with evaporust or similar, so I would plug the holes and fill it that way.
What do you guys think? Any opinions are appreciated, I'm just a little worried. The bike is completely rust free on the outside and I posted some pictures I think September of last year. I'll include one here too. This pic was from when I visited my family in Miami but usually I'm in school in north Florida, so not near a beach/salty air. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/c09c1e42-81a3-4fe9-be1f-fd30f1134437n%40googlegroups.com.
