In case anyone wanted to see an update (after filling the frame with evaporust, rinsing, drying, and applying boeshield t9 rust protection):
On Tuesday, April 1, 2025 at 11:41:00 PM UTC-4 [email protected] wrote: > I had great success soaking with evaporust and then rinsing with mineral > spirits. Blew it out with a compressor but probably a waste of time to be > honest. I followed up by treating the inside of the frame with Fluid Film. > Evaporust also comes in a gel which is useful for the BB or you can use > evaporust coated paper towels and tape the BB shut to let it soak. I’ve > done three frames this way. Works great > > On Tue, Apr 1, 2025 at 11:33 PM Anthony Davila <[email protected]> > wrote: > >> Hello, I just recently acquired the tools to remove my cranks and BB. >> After removing both, I found that the tubes seemed pretty rusty. I've been >> researching different ways I can get rid of this rust but they feel very >> cumbersome and involved (which I'm willing to do but unfortunately it'll >> have to wait till May). I'm thinking of possibly filling the frame with >> evaporust or similar, so I would plug the holes and fill it that way. >> >> What do you guys think? Any opinions are appreciated, I'm just a little >> worried. >> >> The bike is completely rust free on the outside and I posted some >> pictures I think September of last year. I'll include one here too. This >> pic was from when I visited my family in Miami but usually I'm in school in >> north Florida, so not near a beach/salty air. >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion visit >> https://groups.google.com/d/msgid/rbw-owners-bunch/c09c1e42-81a3-4fe9-be1f-fd30f1134437n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/rbw-owners-bunch/c09c1e42-81a3-4fe9-be1f-fd30f1134437n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/rbw-owners-bunch/e1d58a6f-24be-4c95-bf1c-3841067060f4n%40googlegroups.com.
