Here is picture of O-ring setup: http://www.flickr.com/photos/claytonesseff/4780906703/in/set-72157624467335916/
That should explain what I was trying to say. On Mon, Nov 15, 2010 at 2:47 PM, Clayton Scott <clayton...@gmail.com> wrote: > Except you still need to remove the clip to remove the bag. > The O-ring does not need to be removed and on top of that eliminates rattle > of rod in tubes. > (Of course maybe the cippiola clip helps with rattle too, not sure about > that. Never tried) > > > > > > On Mon, Nov 15, 2010 at 2:36 PM, Steve Palincsar <palin...@his.com> wrote: > >> On Mon, 2010-11-15 at 14:16 -0800, Clayton Scott wrote: >> > Let's try this again (hit send too soon). >> > >> > >> > I use one. The only thing I hated was the paper clip that holds the >> > rod in. >> > Instead I use a rubber O-ring between the center tube attached to >> > contraption bolted to stem and the tube attached to the bag that is >> > closest to the bent end of the rod (if that makes sense). That way I >> > can remove the rod and the bag without having to remove the O-ring. >> > Eliminates rattle and paper clip is no longer needed. >> >> A circular Clippiola paper clip does the same thing. >> >> >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To post to this group, send email to rbw-owners-bu...@googlegroups.com. >> To unsubscribe from this group, send email to >> rbw-owners-bunch+unsubscr...@googlegroups.com<rbw-owners-bunch%2bunsubscr...@googlegroups.com> >> . >> For more options, visit this group at >> http://groups.google.com/group/rbw-owners-bunch?hl=en. >> >> > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bu...@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.