Congrats! Can't wait to see the images! Regarding the wheel question:
I respaced a 130 wheel to use on my Hilsen. Didn't even replace the axle. It just sits a little inside the dropouts with plenty o' meat left over (and if you poke around Sheldon's bikes, he talks about using a QR setup with an axle flush to the nut, so he could achieve some minor tensioning corrections on a singlespeed/vertical dropout setup). You really just need 5 mm total of washers (mine was done with two x 2 mm and I figured that was close enough.) Hope that helps, - Jim -- Jim Edgar cyclofi...@earthlink.net Cyclofiend Bicycle Photo Galleries - http://www.cyclofiend.com Current Classics - Cross Bikes Singlespeed - Working Bikes Gallery updates now appear here - http://cyclofiend.blogspot.com "Steel's what you want for a messenger bike. Weight. Big basket up front. Not cardboard with some crazy aramid shit wrapped around it, weighs about as much as a sandwich." -- William Gibson, "Virtual Light" -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.
