right now I can't get the set screw out... I've done myself in good here. On Jun 7, 5:09 pm, Mark Chandler <gravelb...@hotmail.com> wrote: > > Date: Thu, 7 Jun 2012 17:03:12 -0700 > > Subject: [RBW] Re: Saddlebags and smaller bikes > > From: fitzb...@comcast.net > > To: rbw-owners-bunch@googlegroups.com > > > Itty bitty bike and a Carradice Barley. I use the Carradice Bagman. > > But I'm crabby at it now, the rack part won't stay in the clamp. > > Remove the tiny set screws, and remove the rack/support from the clamp. > Check the rack/support to make sure there are no bad gouges, cracks, etc, > where the set screws make contact. Replace the set screws with regular > allen-style bolts (example: bottle cage/rack boss bolts). When you're sure > that the rack/support is fully seated in the clamp, remove the bolts, and > apply some blue/242 Loctite to the bolts' threads, and snug them down good. > Let the Loctite cure for 12-24 hours (with no load on the rack/support), and > you should be good.
-- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.