Patrick Moore iPhone
On Jun 7, 2012, at 6:24 PM, "Allingham II, Thomas J" <thomas.alling...@skadden.com> wrote: > See earlier in this thread ( or maybe even an earlier thread). I had the > same problem, and Loctite didn't solve it. But someone (don't remember who) > said you just need to grind a little slot in the Bagman tubing, and it holds > perfectly. That was I -- see below. > > Sent from my iPhone > > On Jun 7, 2012, at 8:19 PM, "Bertin753" <bertin...@gmail.com> wrote: > >> I had this problem. I removed the platform and filed slots into the ends for >> the set screws, then used loctite on the screws. >> >> Patrick Moore >> iPhone >> >> On Jun 7, 2012, at 6:03 PM, Lynne Fitz <fitzb...@comcast.net> wrote: >> >>> Itty bitty bike and a Carradice Barley. I use the Carradice Bagman. >>> But I'm crabby at it now, the rack part won't stay in the clamp. >>> >>> Lynne F >>> >>> On Jun 7, 11:30 am, Duplomacette <jjrhildr...@gmail.com> wrote: >>>> I'm having the same problem with my medium on my 54 cross check. >>>> Pretty annoying. Nobody likes spending MORE money just to make the >>>> thing they just spent money on work. >>>> >>>> On Jun 7, 12:26 pm, johnb <jbust...@gmail.com> wrote: >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>> I am challenged by short legs. I have a 52cm Atlantis with 26" wheels with >>>>> a medium saddlesack and SKS fenders. Because the bike frame is small and >>>>> the saddle sack is medium, the bag rubs back and forth throughout the ride >>>>> against the fender. When I put a rear rack on, it silences the bag but >>>>> also >>>>> cuts 30% of its capacity out since it gets a bit smushed... For the >>>>> moment, >>>>> I am tolerating the back and forth but there are days it bugs the — well >>>>> lets just say it gets on my nerves. >>>> >>>>> So my question, are there good canvas saddlebags that hold tools, tube, >>>>> sunscreen and assorted sundries that will fit in my frame? >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "RBW Owners Bunch" group. >>> To post to this group, send email to rbw-owners-bunch@googlegroups.com. >>> To unsubscribe from this group, send email to >>> rbw-owners-bunch+unsubscr...@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/rbw-owners-bunch?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "RBW Owners Bunch" group. >> To post to this group, send email to rbw-owners-bunch@googlegroups.com. >> To unsubscribe from this group, send email to >> rbw-owners-bunch+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/rbw-owners-bunch?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > > <mg_info.txt> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.