This is also what leftover wheel quick releases were created for. Spacer may be required.
On Thu, Jun 14, 2012 at 8:15 AM, Michael Santos <santosmicha...@gmail.com> wrote: > You can thread a bolt through the bottom bracket tool into the spindle to > keep the tool in place, can't remember the size, maybe 8mm fine pitch. Then > just use a cheater bar over your adjustable wrench for extra leverage. > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/rbw-owners-bunch/-/XrdXW1vuor0J. > To post to this group, send email to rbw-owners-bunch@googlegroups.com. > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- "Push back against the age as hard as it pushes against you." Flannery O'Connor ------------------------- Patrick Moore, Albuquerque, NM, USA For professional resumes, contact Patrick Moore, ACRW http://resumespecialties.com/index.html ------------------------- -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.