And in the realm of overkill, there's a $10 Pedro's Bottom Bracket Holder tool that makes it easy to maintain a good connection between wrench handle/bottom-bracket-tool/bottom-bracket. It's basically an easy-to-tighten-and-loosen bolt of appropriate length. Yours, Thomas Lynn Skean
On Thursday, June 14, 2012 9:15:30 AM UTC-5, Michael Santos wrote: > You can thread a bolt through the bottom bracket tool into the spindle to > keep the tool in place, can't remember the size, maybe 8mm fine pitch. > Then just use a cheater bar over your adjustable wrench for extra leverage. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To view this discussion on the web visit https://groups.google.com/d/msg/rbw-owners-bunch/-/_HozH2LMzYIJ. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.