I used clear silicone to attach the rear light wire to the inside of the fender. I use the B & M seculight and it works great on the SKS Longboards
David On Monday, October 29, 2012, Pierre wrote: > Berthoud fenders (at least the 50mm ones) have rolled edges that is the > perfect fit for a Schmidt co-ax cable. I've used large patches of electric > tape here and there to hold the wire in place, so far so good (make sure > you apply tape on clean fenders). Pierre. > > On Monday, October 29, 2012 1:26:46 AM UTC+1, Kelly wrote: >> >> Light I'm installing is a Busch & Müller 4D Lite Plus. >> >> I put one of these on a Long Board against recommendations and it seems >> to work fine. Bright and more than capable of being the only rear light. >> >> Now I'm ready to put this on my AHH with Berthoud fenders. Anyway I was >> looking for conduit to run along the inside of the fender and wondering the >> best way to attach wire / conduit to the fenders. >> >> Thanks >> >> Kelly >> >> PS >> Do you know of optimum mounting point for functionality of this light or >> .. It appears to point LEDs down a hair indicating a mounting mid way up on >> curve of fender. Just my opinion. >> >> -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/rbw-owners-bunch/-/-LAIsGlyigIJ. > To post to this group, send email to > rbw-owners-bunch@googlegroups.com<javascript:_e({}, 'cvml', > 'rbw-owners-bunch@googlegroups.com');> > . > To unsubscribe from this group, send email to > rbw-owners-bunch+unsubscr...@googlegroups.com <javascript:_e({}, 'cvml', > 'rbw-owners-bunch%2bunsubscr...@googlegroups.com');>. > For more options, visit this group at > http://groups.google.com/group/rbw-owners-bunch?hl=en. > -- Cheers, David David Verrinder 406-646-6813 dverrin...@gmail.com -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To post to this group, send email to rbw-owners-bunch@googlegroups.com. To unsubscribe from this group, send email to rbw-owners-bunch+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en.