Scot, It is possible, http://flic.kr/p/dUxFk4 (sorry for the bad picture). I've never understood what the parameters are to make it fit, my NBFR is an older one. When i tried with the p-clamps i actually didn't like how it fit.
this is not a perfect situation though, having it canted far enough back to mount to the eyeles makes adjustment of canti brakes quite difficult (if you need to tighten the canti-bolts, or need to make straddle adjustments). i guess with side-pulls it would be a little easier but then getting to the center bolt would require a shorter l-wrench. just for info this is a 1st gen, single-tt 56cm sam. the fork only has a single lower eyelet at the bottom so the rack is bolted there and i have fenders mounted to the rack itself. this front rack does not have the 3 holes at the bottom like the newer ones. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch?hl=en. For more options, visit https://groups.google.com/groups/opt_out.