Here are a couple of bad photos of how I did it. http://www.flickr.com/photos/76454470@N05/8358830287/
It was a pretty simple job and I did not get worked up about it being "pro" level work. I removed the existing light's internals, sawed the Supernova tail light mounting tabs off so it would fit inside the housing, ran the wire out the back and used a heavy duty 2 part epoxy to attach the light the the back plate of the housing. after the epoxy cured. I surrounded the light w/ silicone to take up some dead space and to help adhere the light as well. Since I run my wire's externally, I ran the wire over the fender and down the fender stay. On Monday, August 5, 2013 12:56:19 PM UTC-4, SMP wrote: > > What a timely post! I am actually in the same dilemma, where I have a > Supernova up front, and wanted to get a fender-mounted taillight. Alas, I > only recently came to realize that my headlight is only compatible with a > Supernova tail light. I had no idea you could place the Supernova > taillight into B&M housing. Do you have any up-close photos or a 'how to' > of this setup? > > On Monday, August 5, 2013 3:50:50 AM UTC+2, Brian Campbell wrote: >> >> I made some changes to my AHH. I finally caved in to function over form >> and swapped the Paul Racer brakes for long reach Tektros. I will be using >> this for commuting a couple of days a week, now that I have changed jobs. I >> added the Nitto R-26 rear rack, SON 28 wide body hub in Open Pro, (Peter >> White built) and put a Supernova tail light in the Busch & Mueller tail >> light housing. I was unaware, previously, that the Supernova headlight and >> taillight were a matched pair and had to be used toghther. Ran the wiring >> along the front rack w/ Supernova quick disconnects. >> >> The rack works fine with my size 11.5 feet and my Arkel Utility Basket >> rear bags. I do wish I could mount it lower without havint to cut it but >> the mounting tang gets hung up on the rear quick release. I mat still make >> the cut in the future, we'll see. Hope this link works. >> >> >> http://s91.photobucket.com/user/bylar13/media/AHH/090_zps90e4fca5.jpg.html?sort=2&o=0 >> >> >> -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bunch@googlegroups.com. Visit this group at http://groups.google.com/group/rbw-owners-bunch. For more options, visit https://groups.google.com/groups/opt_out.
