MDF is rather heavy, is it not? I believe the only thickness is about 3/4in which becomes rather heavy. It would be advantageous if you had a planing machine which might be able to basically thin the 3/4in ply to maybe 1/2in (reducing wood weight by 33%, correct?) and the wood will still be very smooth.
-Mike M. Message sent by way of mobile device On Aug 4, 2009, at 7:15 PM, "Ben Holko" <b...@holnet.net> wrote: > What are people's thoughts on using MDF for panel work, or even as > the structural hull if a thicker grade was used. MDF is very smooth, > so should provide a good finish when painted. Does MDF resist > moisture well enough once painted? > > I know it's heaveir than ply, but the finish on it may offset that > penalty, and it's still lighter than metal :) > > Ben > > > > --~--~---------~--~----~------------~-------~--~----~ You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat -~----------~----~----~----~------~----~------~--~---