Looks very well thought out Caleb. A suggestion. For the future,you might want to replace the wooden linkage with either plastic or metal if you can.
On Tuesday, July 29, 2014 7:52:23 PM UTC-4, Caleb Smith wrote: > > > Ok, rotate motor was ordered, plus a ESC to control it. > Took some photos of the elevate system for ya'll. You can see the > extension on the servo horn which is both crimped and glued. You can also > sort of see the piece I built that will go on the gun plate. Last photo > you can see where I'm planning on mounting the door lock actuator, plus > the cardboard splinter shield which is built out of the box the gun was > shipped in. The cardboard splinter shield isn't permanent, I was just > using it as a test to make sure my measurements were correct before I > started cutting the wood. > > > >> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
