Other motor options, in particular the Harbor Freight saw motor/gearbox. https://groups.google.com/forum/?hl=en#!searchin/rctankcombat/t-70$20motor/rctankcombat/uyaaYAQHsMM/IOHtJCDWEt0J
ST On Thursday, February 19, 2015 at 12:25:36 PM UTC-5, srwh...@gmail.com wrote: > > Been kicking (or moving) this project around the work shed for a long > while. No actual progress beyond figuring out the curved hull front, until > now. In the past week I have managed to get the suspension swing arm design > to where I am happy with it and get 10 of them welded. I have also bought > and received the motors for the project. I went with the ATV starter > motors (thanks Mike Mangus for the idea) that i saw used on the S-tank > T-081. I plan to use the same type of linear actuator to raise and lower > the articulated turret (crazy French). The suspension will use the same > type as T-044. I found some heavy duty lock collars that fit a 1/4 bolt > through the side (lock). I also think I have figured out the potential > paintball feed issues with the articulated turret, more on that once mocked > up. > > Stewart > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.