Yep would be easier with pics...!!!

Jean-Maxime Cyr St-Pierre

Le 2 avr. 2017 5:53 PM, "Loren" <kunkmies...@gmail.com> a écrit :

> Keep forgetting I have a pic to put up for this. This is quite simple, a
> bolt with a hole drilled in it and a pin made of piano wire.  The pin
> extends down into the tube making up the swing arm, and rides on the lower
> surface, being pushed on when the wheel is pushed up.
>
> Two nuts hold the bolt to the hull, with the bolt head outside. A wrench
> in the outside nut and the bolt head allow the grip on the hull to be
> loosened, allowing the bolt to be rotated to adjust the pressure the spring
> pin is putting against the swing arm, changing the ground pressure and/or
> track tension.
>
> I really need to make a example piece, with the side of the tube cut away
> so the actual arrangement can be seen from the side. You do need a sturdy
> side wall to take the torsion on the bolt used.
>
> --
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to rctankcombat@googlegroups.com
> To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
> Visit the group at http://groups.google.com/group/rctankcombat
>
> ---
> You received this message because you are subscribed to the Google Groups
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to rctankcombat+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rctankcombat+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to