Might be to late... Smooth cast 300 is good stuff, as already mentioned there is no harm going a slightly slower setting resin. I like 325 for it's tint-ability and slower set time. Oomoo 30 works great for block moulds, you only get 25-30 casts out of a mould before it begins to bond (unless you use mould release and silicone mould conditioner) What I like to do is make a single part master mould cast 20 single cleats then glue them to a board and make a mould of 20 cleats. 25x20=a lot of usable cleats....
Tiger On Wednesday, 30 May 2018 08:08:09 UTC+9:30, Caleb Smith wrote: > > I'm looking to redo the tracks on my Locust with cast polyurethane tracks > like the new tanks are using. I see Frank used *Smooth-Cast 300 *for his > Tiger a long time ago. Is that still the recommended stuff? > Any tips, tricks or general advice you can pass along is appreciated. I've > finally got a working drive system in the Locust but the tracks are falling > apart. Time to upgrade. > > Thanks, > Caleb > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to rctankcombat@googlegroups.com To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to rctankcombat+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
