Hi Larry, Try a RIB. Relay In a Box. www.functionaldevices.com Our local electrical supply houses stock them. They are versatile relays and reasonably priced. We use the RIBU1C. The coil ratings are 10-30VDC, or 10-30VAC, or 120VAC. The contacts are rated for 10A @ 277VAC or 28VDC. They also carry several other AC ratings depending on N/O or N/C application.
Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Larry Brown Sent: Friday, November 07, 2008 4:29 PM To: RE-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] battery box fan Wrenches. On an upgrade to an existing system, we just installed a Xantrex XW6048 inverter. We have a 48 volt dc battery box vent fan that we used to run through the relay on the old SW5548. The XW6048 has a 12 vdc aux output so I assume we need to install a relay to run the fan, 12vdc input, that will allow 48 vdc output Any suggestions on what relay to use? Thanks Larry Brown Sun Mountain _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org