We've taken many of these on over the years: it can have a satisfying outcome, if the customer is really willing to pay to fix it. We don't even try to work with what's there; everything comes off the wall, and we rebuild the whole system using any decent parts that can be reused. Most customers report much more reliable operation after, but you still can't find everything. I try to stay out of the premises distribution wiring, and keep the work just to the PV, batteries, inverter, etc. This keeps it clear what you're responsible for, and what you're not. If pulling a permit, I write it up to specifically exclude distribution wiring.
These days, I only take them on, if they are essentially buying a new system (batteries, more PV, inverter, or charge controller upgrade.....) I often sell them a whole new power board, and offer a trade-in on their old usable equipment. Even reusing old PV is getting harder these days (rewiring an old array of 50 watt modules, often just isn't worth the time) Unless you've done several of these, I'd stay clear of them. There are easier ways to make a living. GridTie has fewer call backs, by far. R. Walters r...@solarray.com Solar Engineer On Jan 13, 2011, at 3:08 PM, jay peltz wrote: > Yes to all what Dana says. > > I've had one good friend who will only work on such projects if hes allowed > to do. > > 1. fix any and everything that needs to be, and yes its going to cost. > otherwise he walks away. > > and > > 2. he still has them sign a contract that says hes not responsible for things > hes not touched or some such legalese. > IE wire in walls etc. > > Its a very scary part, as if there is a problem, they will sue you first > regardless as you were the last to touch it. > > One almost horror story, I had added some solar to a system. I didn't fix all > that could have been. > To make a long story shorter, the house burned down (a month after I had > worked on it) and it started near the electrical room. Turns out it was > arson, but I didn't sleep well for a few days, until I knew that. > > CYA. > > > > > > > > On Jan 13, 2011, at 1:26 PM, Dana wrote: > >> DONOT assume anything! >> >> Photograph. >> Draw schematics. >> Specific gravity test. >> Do wire pull tests. >> Check tightness on all connections. >> Verify voltage and polarity. >> Wire calc every wire. >> Measure distances. >> Double check. >> >> Get paid for this , you did not create this mess. >> >> >> Dana Orzel >> Great Solar Works, Inc >> E - d...@solarwork.com >> V - 970.626.5253 >> F - 970.626.4140 >> C - 970.209.4076 >> web - www.solarwork.com >> >> "Responsible Technologies for Responsible People since 1988" >> Do not ever believe anything, but seriously trust through action. >> >> _______________________________________________ >> List sponsored by Home Power magazine >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Options & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> List-Archive: >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> www.re-wrenches.org/etiquette.htm >> >> Check out participant bios: >> www.members.re-wrenches.org >> > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: RE-wrenches@lists.re-wrenches.org > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org >
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
